You'll find everything you need to get on the water fast in our Quick Start area. There you can follow the online guide or download a PDF version.


Setting up your Bluefin is as easy as 1, 2, 3. Bag to boat in under 3 minutes!

  1. Unzip the bag, remove parts from bag and make 2 stacks, starting with sections 3 and 4. 
  2. Open hatches, engage clamps. 4 on both bulkheads, 3 each in sections 1 and 6. Push clamp jaws onto pin, push handle down.
  3. Lay stacks down, clamp together starting with middle bottom clamp. Clip seat in. Test on soft surface, and GO PADDLE!


Don't forget to Register your kayak. 


Setting up your AngerFish is just as easy. Quick Start for AnglerFish.