Here's how to attach the All-Terrain Wheels to your Bluefin or AnglerFish bag.


  1. Remove the pins and slide the axle through the sleeve. 


2. Slide a wheel on each end and replace the pins. You might need to tip bag forward just a little to get the wheels on. 



If you have a bag without a sleeve and wheels with straps, follow these directions.

  1. Assemble the wheels: remove R pin, slide wheel on, replace R pin. Do on both ends.
  2. Place all-terrain wheels at the back of your bag.
  3. Tip your bag forward so the wheels are just off the ground and slide the loop end of the webbing up around orange wheels so it sits above the axle. Let bag down. Repeat for both wheels.
  4. Feed clip ends through the left and right loops, clip together and cinch tight.

See photos below.


Here's how to stash it in your kayak.


Tip bag forward and slip the loop under the wheel.



Slip buckles through loops.

Clip buckle and cinch tight. Tip and roll away.